Optimized at 14 Watts with 1.5Ω replaceable coils, the Endura T18E vape starter kit delivers a perfect vaping experience every time. The Endura T18E Pyrex and Stainless 2.0ml Tank is top-fill for quick and clean refills and the Japanese organic cotton wicking material delivers maximum flavors from your favorite eliquids.
Advanced integrated safety protections guard against overheating and over discharge and greatly improve charging safety and overall reliability.
With 1000mAh of real battery capacity, it can be conveniently charged via standard Micro USB cable and features Innokin’s ‘Vape While Charging’ technology for a daily vaporizer that you can rely on. The Innokin Endura T18E is an all in one vaporizer
How to charge
• Easy to charge via Micro 5pin USB port. When battery indicate that is full,
How to fill the Innokin Clearomizer:
1. Unscrew the top.
2. Tilt clearomizer at 45 degree angle.
3. Insert needle tip and fill with e-liquid (avoid small metal hole)
4. Fill clearomizer to top fill line and wait 5 min before use.
5. Screw top back on.
How to fit / exchange coil
1. Make sure the clearomizer is detached from the battery.
2. Turn the clearomizer upside-down, so that the mouthpiece is pointing towards the floor.
3. Unscrew the base of the clearomizer
4. Pull out the coil from the base and fit new. Make sure that coil sit properly in to the slot (a loose coil will cause the clearomizer to leak from airflow)
5. Screw the base back (if you see gap between tank and base cap it’s mean coil was wrongly assembled). Fill with the liquid and wait 5 min before use.
6. Screw the clearomizer onto your battery.
• 1x Endura T18 Battery
• 1x Prism T18E Tank
• 1x Spare coil
• 1x Micro USB Charging Cable
• 1x Accessories
• 1x Manual
The warranty period for particular kit elements is:
1 month from date of purchase:
• 1000 mAh battery